OSRose IP Configuration
www.dev-osrose.com
After reading this guide you will be able to setup a R.O.S.E Online Private Server using the OSRose Source.
First we must go to Start > Control Panel > Network and Internet Connections > Network Connections.
Right now we should see an Icon “Local Area Connection”
Important Note: This may change depending on the quantity of ethernet ports that your computer has..
Lets double click Local Area Connection and then click the Support Tab.
You will be able to see a window just like the one above.
Important Info: The details in the window above are different than yours.
Now that we have the complete Ips information we are ready to edit our OSRose .conf files.
You are going to notice this section in all 3 OSROSE Configuration files.
[SERVERDATA]
serverid=1
servertype=2
serverip=
serverport=29200
servername=Channel 1
maxconnections=500
parentid=1
connection=2
lanip=
lansubmask=
Lets focus only in the bold ones.
ServerIP, LanIP, & Lansubmask.
Our server IP would be 74.68.195.203
Our LanIP would be 74.68.194.225
Our Lansubmask IP would be 255.255.255.0
Now that we have the information we need our configuration file should look just like this!
[SERVERDATA]
serverid=1
servertype=2
serverip=74.68.195.203
serverport=29200
servername=Channel 1
maxconnections=500
parentid=1
connection=2
lanip=74.68.194.225
lansubmask=255.255.255.0
!!Remember!!
This is just a guide and not the information that goes into your configuration files! Follow the guide step by step and you will have wonderful results!
This guide was made by Poseidon to OSRose Community.
Dec 18, 2007.
--
The attachment includes this guide in Microsoft Office Word 2007 format. Just incase someone wants to save it for a later time.
Edit: Thanks Rifke